Technical Data Bulletin
CCI licenses the ultra violet coating technology from Finishes Unlimited, Inc.


Patent Pending With the United States and Canadian Patent Offices

Revision #: 005                                                                                               Revised: 11/20/09
Product Code: 06-line                                                                                                                     
Product Name: Exterior Grade UV Cure Coating for use over Composite Substrates


Description:
Finishes Unlimited, Inc. has developed an exterior grade radiation cure coating designed for
use over composite substrates such as PVC, WPC, cementitious, fiberglass, and others. These
coatings are available in clear or colors at various gloss levels. Coating is 100% solids thus
contain no volatile organic compounds (VOC’s) or hazardous air pollutants (HAPs).
Exceptional film properties such as adhesion, color hold, gloss retention, and resistance to
mold, moisture, staining, and scratch are produced when properly applied and cured. Coating
can also be formulated to provide excellent solar reflectance and reduction in heat build.

Application:
A wide range of application equipment can be used to apply this coating including
conventional spray, electrostatic, HVLP, air-assist airless, airless, flow, roll, or vacuum coating.
This coating can be applied directly to most composite substrates such as PVC, cementitious,
and others without the use of a primer. For fiberglass and other like substrates Finishes
Unlimited’s UV Cure Transition Coating is required for adhesion purposes. This system
consists of applying the UV Cure Transition Coat, curing, then applying the UV Cure Topcoat
and curing. No sanding is required between coats.

Cured Film Properties
At 1.2 mils Dry Film Thickness


¹ Cycle test consists of 12 hours UVA using 340 bulbs at irradiance of .76 w/m2 at 60°C, followed by  11:50
condensation, and 10 minutes cold water spray.

² Value is dependent on color. Range for reference only.

³ Value is dependent on color. Range for reference only.

⁴ Represents percent reduction in antimicrobial activity. Staphylococcus aureus, escherichia coli, and
klebsiella pneumonae tested.

⁵ 30 Cycles, Method B

⁶ 30 Days Immersion, Method A

⁷ Based on double rub method.
Test
Method
Results
  Test
Method
Results
Adhesion
ASTM 3359
5B (100%)
  QUV-4,000 hours
ASTM G154 ¹
ΔE <4.0 CIElab
Heat Build
ASTM 4803
<48°F - <52°F
²
  Humidity
ASTM 4585
3,000 hours
Solar Reflectance

ASTM C1549-04

45% - 60%³
  -Degree            
of Blisters

ASTM D 714

10, none
Mold Growth
ASTM D3274
10, no mildew
  -Gloss Retention
ASTM D523
>/= 90%
Antimicrobial
JIS Z 2801:2000
>99.99%⁴
  Salt Spray
ASTM B117
3,000 hours

Hardness

ASTM D3363

2H – 3H
  -Degree            
of Blisters

ASTM D714

10, none
Impact
Resistance

ASTM D2794

160” lbs
 
- Gloss Retention

ASTM D523

>/= 90%
Thermal Cycling

ASTM D6944-03

No effect⁵
 
Water Immersion

ASTM 6943

No effect⁶
Stain Resistance

ASTM D4828

Excellent
  Solvent
Resistance

ASTM D5402

100 MEK⁷
Flame Spread
E84 - 05
Class A
  Specular Gloss
ASTM D523
As required

482 Wheeler Road
Sugar Grove, IL 60554

Phone: 630-466-4881
Fax: 630-466-1064